Xiamen Acey New Energy Technology Co.,Ltd
The mixing barrel can be vacuumed, so that the slurry is stirred in the vacuum state, to achieve no bubbles in the slurry, so that the stirred material coating process is more uniform.
Brand:
ACEYItem No.:
ACEY-XJB-7-30LCompliance:
CE CertifiedWarranty:
One Year warranty with lifetime supportOrder(Moq):
1setPayment:
L/C,T/T,Western Union, PaypalProduct Origin:
ChinaLead Time:
7days30L High Speed Planetary Dispersion Vacuum Mixer For Slurry Mixing
Description
Suitable for dry mixing and wet mixing, made of SUS304 stainless steel, able to resist corrosion of acid and alkali and organic solvent, at the same time, the mixing barrel can be vacuumed, so that the slurry is stirred in the vacuum state, to achieve no bubbles in the slurry, so that the stirred material coating process is more uniform. The mixer is designed as a spiral belt mixer and a planetary mixer, so that there is no stirring dead zone in the mixing barrel. In addition, according to the technical requirements, the dispersion plate and the circular stirring are operated at multi-speed, and the speed and time of each stage can be set.
Features
1. Made of SUS304 stainless steel, resistant to corrosion by acid, alkali and organic solvents.
2. Four-oar two-axis planetary agitation, twist frame agitation impeller with high speed dispersing disk and scraping wall, no stirring dead Angle.
3. Low-speed mixing is realized through public rotation and rotation, while micro-mixing is realized through shear force on high-speed dispersion plate.
4. Vacuum environment, effectively eliminate the bubbles generated in the stirring process, maintaining a good vacuum effect.
5. Multi-stage speed operation can be carried out, and the stirring speed and time of each stage can be set.
6. Slurry bucket lifting design, equipped with spotlights, easy to operate, to ensure the safety of the vacuum mixing process.
7. Jacket type mixing tank design, can pass cooling water, suitable for a variety of process requirements, with temperature controller and high temperature alarm system.
Specification
B. Design volume: 40L;
C. Effective volume: 30L.
1-1 Product name and specification model
A. Planetary dispersion vacuum mixer ;
1-2 Basic structure
A. Cantilever structure hydraulic lifting bucket;
B. Single direct temperature measurement mode;
C. Single dispersion shaft + double stirring shaft + with scraping wall
1-3 barrel (mixing barrel)
A. Specification: Dia. 280mm×220mm;
A. Liner material: SUS304;
B. Mirror polished after turning of the inner wall to ensure good roundness;
C. The upper flange plane of the mixing tank and the upper tank body are sealed by a sealing ring;
D. G1/2" discharge ball valve at the bottom of the barrel;
E. A pair of handles on the barrel body.
Pure jacket direct cooling/heating
The water inlet and outlet ports are G3/8", equipped with quick-opening unions; the jacket can pass cold or hot water to cool or heat the processed material.
1-4 Upper barrel body (kettle cover)
A. Material: SUS304;
B. A Φ40 powder/liquid hopper, which can be quickly switched on and off; 1 spotlight; with 2 small windows (a spotlight port and an observation hole), a vacuum pressure gauge, and other necessary connections (vacuum/venting) /spare).
1-5 mixing principle
The low-speed stirring paddle and the serrated dispersing disc installed on the high-speed dispersion shaft both rotate and revolve; at the same time, combined with the low-gap design of the stirring paddle, the low-speed stirring paddle makes the material produce strong kneading interference motion and up-down/left-right circulation. ; The high-speed dispersing disc strongly shears and breaks up the materials; thus finally ensuring that the materials are fully dispersed and evenly blended (mixed).
1-6-1 revolution/mixing motor and Inverter, reducer
A. Quantity: one set; B. Motor power: 1.5Kw/4P;
C. 1.5KW frequency converter matched with the motor;
D. Matching reducer BL1, reduction ratio of about I=29, use factor Fa=1.0 .
1-6-2 Planetary revolution speed
Speed: 0~50rpm (reference system: ground), adjustable.
1-6-3
Wall scraper
Quantity: 1 group; scraping material: SUS304 and Teflon; consistent with revolution speed.
1-6-4
Gap reference value(Not mandatory)
A. Tolerance of mixing paddle and bottom: 2～4 mm;
B. Tolerance of mixing paddle and barrel wall: 3±1.5 mm;
1-7-1 stirring shaft/stirring paddle speed
Speed: 0~80rpm(Reference system: planetary box); or 0~130rpm (reference system: ground); adjustable.
1-7-2
mixing paddle
A. Material: SUS304; B. Quantity: one (group).
1-7-3 stirring slurry form
"Spiral twist type"; linear velocity: 0~0.55m/s (reference system: planetary box).
1-8-1 Dispersed motor
A. Quantity: one set; B. Motor power: 2.2Kw/2P;
C. With frequency conversion speed controller matched with the motor.
1-8-2 Dispersion speed (rotation)
A. Speed: 0~6000rpm, adjustable; B. Linear speed: 0~17m/s.
1-8-3 Dispersing shaft and disc
A. Material: SUS304;
B. One, a dispersion plate is installed on the dispersion shaft to ensure better dispersion/mixing.
C. Diameter of dispersion plate: Φ55mm;
1-9 lifting (mixing barrel)
A. Hydraulic lifting: piston cylinder Φ63/D40×S270; equipped with double guide rods, positioning device; safe and reliable positioning.
B. One set of hydraulic oil pump station, equipped with a 0.37Kw/4P motor; no oil leakage, low noise.
C. Lifting height: ≤270.
1-10
vacuum system
A. The stirring and dispersing process can be carried out under vacuum; vacuum degree: ≤-0.098mPa.
B. Equipped with vacuum pump 2XZ-2. C. With vacuum buffer tank and switch.
D. Dynamic seal: mechanical seal; static seal: O-ring seal.
E. Maintain the pressure for 24 hours, and no oil leaks into the slurry tank in the state of mixing or maintaining pressure.
1-11 positioning system
A. With positioning adjustment device and locking device, it can accurately position the mixing barrel and the upper barrel and prevent rotation.
B. The positioning stop of the lower flange of the upper barrel body is matched with the mixing barrel to ensure that the position of the mixing barrel is reasonable and the positioning is accurate.
1-12
control system
(Manual operation control)
A. Manual operation control function: The vacuum start/stop during equipment operation, frequency conversion speed regulation, temperature display (or temperature control), spotlight switch, lift, and emergency stop operation are all performed on the operation panel.
Remarks: Dispersion has a timing function (recommended, but normal manual operation (that is, without PLC and touch screen) does not include this item).
B. Man-machine interface operation function: This is an optional item, customers need to purchase at an additional price if necessary, and the plan will be quoted separately.
1-13
Safe operation
A. Relying on the frequency converter and the limit travel switch, through the specially designed control route, it is guaranteed that the barrel will stop automatically when it reaches the specified position.
B. During the ascending process of the barrel, the mixing/dispersing part of the equipment cannot be started. Similarly, when the machine is running the mixture, the barrel cannot be lowered and the mixing barrel cannot be opened.
C. Use circuit design such as proximity switches to ensure that the mixing tank cannot be lowered under vacuum.
D. The special vacuum buffer tank design can effectively prevent the vacuum pump oil from returning to the mixing tank.
E. The door bolt type buckle is set on the kettle cover and the mixing barrel to prevent the oil cylinder from falling automatically.
1-14 Temperature
measurement method
0-300℃, the temperature probe is located on the wall of the barrel (or the bottom of the barrel) near the bottom of the barrel, contacts the material and displays the temperature.
1-15 Total power of main engine:
Working voltage/frequency: 380V/50Hz/3Phase; control voltage: 220→24V.
Width Adjustable Experimental Battery Film Coating Machine
Adjustable Experimental Battery Film Coating Machine
Hydraulic Electric Roller Press Machine With Rewinding And Unwinding System
ACEY-DG200 Hydraulic Roller pressure machine is an Automatic Battery Electrode Rolling Press System with precision digital pressure control .
Coil to Coil Continuous Slitting Machine For Battery Film Cutting
The equipment is equipped with precision knife bases, which can achieve the high precision foil partitioning.
Supercapacitor And Cylinder Battery Winding Machine
ACEY-3270C is equipped with manual charging of positive and negative electrode plates, diaphragm and tape.
Precision Digital Display Supercapacitor Battery Electrode Shaping Machine
It is mainly used for the shaping of supercapacitor's electric core, making the positive and negative terminal faces form and compact, convenient for laser welding with the upper and lower collector plates.
Threaded Cylindrical Supercapacitor Cell Feeding Machine
It is suitable for supercapacitors (after the welding of the electric cell and the assembly of the O-ring on the upper cover) to be pressed into the inner shell, and the o-ring sealing ring to be fastened inside.
60138 Threaded Cylindrical Supercapacitor Grooving And Pre-Sealing Machine
Manually put the product into the jacket, automatically tighten the ring jacket, and fix the capacitance concentric.
Threaded Cylindrical Supercapacitor Final Sealing Machine Secondary Sealer
It is suitable for the battery and supercapacitor shell to be used for the secondary mold sealing and crimping forming.
703, 7F, Zhonghengji Building, No.223, Qishan North Road, Huli District, Xiamen, Fujian, China
Email : allen@xmacey.com
Skype : tangrutian
Tel : +8618950009155
Whatsapp : +8618950009155
