-
What equipment is needed to make lithium battery pack
Apr 01 , 2021
3C lithium battery pack process, if you want to control the quality and save costs by yourself, it is recommended to buy a cylindrical battery automatic insulation barley paper machine to eliminate defective products, realize the function of pasting barley paper on qualified batteries, and complete the number of cylindrical finished batteries per hour About 4,000 sticks, manual stick...
Read More
-
Ultrasonic metal spot welder
Jun 11 , 2021
Ultrasonic metal spot welder: It is similar to friction welding, but there are difference, Ultrasonic welding takes a short time and the temperature is lower than recrystallization; It is also different from pressure welding because the static pressure applied is much less than pressure welding. It is generally believed that in the initial stage of the ultrasonic welding process, the tangential vi...
Read More
-
Pouch Cell R&D equipment is producting well
Jun 24 , 2021
Acey is currently producing a set of pouch cell battery making lab line for customer in India. Including the heat roller press, Vacuum drying box and semi-automatic die-cutting machine, stacking machine , Ultrasonic spot welder, heat sealing machine，vacuum pump. Most of the equipment is custom-made，such as 300mm width rolling press machine, 90L vacuum drying oven and 300mm width sealing machine. A...
Read More
-
A brief description of the lithium battery automatic stacking machine
Oct 29 , 2021
A brief description of the lithium battery automatic stacking machine: 1. This equipment is mainly used for the Z-shaped lamination assembly of the cathode and anode of the lithium battery cell and the isolation membrane; 2. Adapt to product specifications: L×W×H: (40—200)×(40—150)×(30—55); 3. Capacity: 2.5 seconds for each single chip; 4. Life: lif...
Read More
-
Four processing steps for battery spot welding machine failure
Dec 03 , 2021
When we are using a spot welding machine, due to unfamiliarity with the equipment and unsuitable operation etc, some problems usually occur. The following are common problems and solutions： One: The pedal welding machine does not work, and the power indicator does not light up: a. Check whether the power supply voltage is normal; check whether the control system is normal, whether the communicatio...
Read More
-
What are the preparations before starting the automatic spot welding machine?
Dec 10 , 2021
The electrode pressure of the battery pack automatic spot welding machine has a significant effect on the total resistance R between the two electrodes. As the electrode pressure increases, R decreases significantly, while the increase in welding current is not large, and it cannot affect the decrease in R. Heat production is reduced. Therefore, the strength of the solder joint ...
Read More
-
What are the factors that affect the efficiency of the battery spot welding machine?
Dec 24 , 2021
●Welding current Since the heat generated by the resistance is proportional to the square of the current passed, the welding current is the most important factor in generating heat. The importance of welding current does not simply refer to the size of the welding current, the current density is also very important. ※Nugget: refers to the metal part that solidifies after the melting of the ...
Read More
-
What is the Difference Between DC Inverter Spot Welding Machine and Transistor Spot Welding Machine?
Mar 03 , 2022
In recent years, in the precision resistance welding filed, DC inverter spot welding machine is the most widely used welder. However the transistor spot welder also appears more popularly. Then what is the difference between these two types? 1. Difference of control principle of the welding power supply The power supply of inverter spot welding machine first rectifies and filters the industrial po...
Read More
