-
The importance of lithium battery protection board
Sep 18 , 2021
Advantages of lithium ion battery protection board 1. Overcharge protection, guard against damage to the lithium-ion battery pack caused by overcharge. 2. Over-discharge protection to prevent over-discharge from causing deterioration of battery life. 3. Over-current and short-circuit protection is safer and more reliable during the use of lithium-ion batteries. 4. It is small in size and can be ap...
Read More
-
How to calculate the charging and discharging time of lithium battery
Oct 21 , 2021
Generally, the capacity of lithium battery testing equipment is divided into constant current charging, constant voltage charging and constant current discharging in the process of testing lithium ion battery charging and discharging. 1. Constant current charging means that the current is always constant and the voltage slowly rises to the set value (the upper limit voltage of the ternary lithium ...
Read More
-
A brief description of the lithium battery automatic stacking machine
Oct 29 , 2021
A brief description of the lithium battery automatic stacking machine: 1. This equipment is mainly used for the Z-shaped lamination assembly of the cathode and anode of the lithium battery cell and the isolation membrane; 2. Adapt to product specifications: L×W×H: (40—200)×(40—150)×(30—55); 3. Capacity: 2.5 seconds for each single chip; 4. Life: lif...
Read More
-
The production process of Pouch cell lithium battery
Nov 03 , 2021
With the development of science and technology, the technical barriers to battery production have been broken through one by one, and the pouch cell lithium battery has gradually stepped onto the stage, and subsequently entered a large-scale trial stage. The main processes in the production of pouch cell lithium batteries are pole piece, installation and formation. 1. The pole piece process. The m...
Read More
-
The working principle of the oven
Nov 11 , 2021
When the industrial oven is working, the operator obtains the internal temperature value of the industrial oven through the instrument and the temperature sensor, and then operates through the control system. The hot air circulation heating method of the industrial oven is better than the ordinary heat radiation heating method. The fluidity of the gas can speed up the drying speed of the materials...
Read More
-
What are the steps to use the battery tester?
Nov 19 , 2021
What are the steps to use the battery tester? This question is asked by many customers. And here are the Battery tester is actually a kind of battery testing equipment, mainly used for battery maintenance or testing. The steps to use it are as follows: 1. Connect both the positive and negative poles of the output line, the positive pole of the battery capacity tester and the positive pole of...
Read More
-
Four processing steps for battery spot welding machine failure
Dec 03 , 2021
When we are using a spot welding machine, due to unfamiliarity with the equipment and unsuitable operation etc, some problems usually occur. The following are common problems and solutions： One: The pedal welding machine does not work, and the power indicator does not light up: a. Check whether the power supply voltage is normal; check whether the control system is normal, whether the communicatio...
Read More
-
What are the preparations before starting the automatic spot welding machine?
Dec 10 , 2021
The electrode pressure of the battery pack automatic spot welding machine has a significant effect on the total resistance R between the two electrodes. As the electrode pressure increases, R decreases significantly, while the increase in welding current is not large, and it cannot affect the decrease in R. Heat production is reduced. Therefore, the strength of the solder joint ...
Read More
