-
The working principle of the oven
Nov 11 , 2021
When the industrial oven is working, the operator obtains the internal temperature value of the industrial oven through the instrument and the temperature sensor, and then operates through the control system. The hot air circulation heating method of the industrial oven is better than the ordinary heat radiation heating method. The fluidity of the gas can speed up the drying speed of the materials...
Read More
-
What are the steps to use the battery tester?
Nov 19 , 2021
What are the steps to use the battery tester? This question is asked by many customers. And here are the Battery tester is actually a kind of battery testing equipment, mainly used for battery maintenance or testing. The steps to use it are as follows: 1. Connect both the positive and negative poles of the output line, the positive pole of the battery capacity tester and the positive pole of...
Read More
-
Four processing steps for battery spot welding machine failure
Dec 03 , 2021
When we are using a spot welding machine, due to unfamiliarity with the equipment and unsuitable operation etc, some problems usually occur. The following are common problems and solutions： One: The pedal welding machine does not work, and the power indicator does not light up: a. Check whether the power supply voltage is normal; check whether the control system is normal, whether the communicatio...
Read More
-
What are the preparations before starting the automatic spot welding machine?
Dec 10 , 2021
The electrode pressure of the battery pack automatic spot welding machine has a significant effect on the total resistance R between the two electrodes. As the electrode pressure increases, R decreases significantly, while the increase in welding current is not large, and it cannot affect the decrease in R. Heat production is reduced. Therefore, the strength of the solder joint ...
Read More
-
What are the factors that affect the efficiency of the battery spot welding machine?
Dec 24 , 2021
●Welding current Since the heat generated by the resistance is proportional to the square of the current passed, the welding current is the most important factor in generating heat. The importance of welding current does not simply refer to the size of the welding current, the current density is also very important. ※Nugget: refers to the metal part that solidifies after the melting of the ...
Read More
-
What are the aspects of coin battery safety testing?
Dec 30 , 2021
The button battery is a battery with a unique shape and size. The whole shape is like a small button. However, no matter what type of battery, it needs to be tested for safety. The button battery is no exception. Considering that many people are concerned about the button battery The safety test is not particularly understood. Next, let's introduce the general aspects of the button b...
Read More
-
How to use the lithium battery comprehensive tester
Jan 14 , 2022
The use of lithium battery comprehensive tester is to test the performance of lithium battery, including voltage, internal resistance, capacity, internal pressure, self-discharge rate, cycle life, sealing performance, safety performance, storage performance, appearance, etc. , over-release, etc. 1. Power switch: the power switch of the tester. 2. Emergency stop switch: cut off the discharge circui...
Read More
-
What are the characteristics of the vacuum standing box?
Feb 24 , 2022
The vacuum standing box is a device that can be applied to the production of pouch cell lithium-ion batteries and cylindrical lithium-ion batteries. Its function is to complete the vacuum standing of the battery after liquid injection to promote the absorption of the electrolyte by the pole pieces; or It is used for vacuum standing defoaming and vacuum storage of various materials. T...
Read More
