-
Application of laser spot welding machine
Jan 14 , 2021
As the core component of new energy vehicles, the quality of power battery directly determines the performance of the vehicle. Lithium battery manufacturing equipment generally includes three types of front-end equipment, mid-end equipment, and back-end equipment. The accuracy and automation level of the equipment will directly affect the production efficiency and consistency of the product. As an...
Read More
-
Introduction For Cylindrical Semi-Automatic Winding Machine
Jan 22 , 2021
This machine is mainly used for precision winding of 18650 and 26650 batteries. The working process is as follows: manually put the positive and negative plates into the winding part, separate and stack with the diaphragm, wind according to the process requirements, automatically apply the termination tape, and automatically unload the battery. 1.It adopts single winding needle structure, and the ...
Read More
-
What are the constituent materials of 18650 lithium batteries
Jan 28 , 2021
The 18650 lithium battery is generally composed of positive electrode material and negative electrode material. The positive electrode materials include lithium nickelate, lithium manganate, NMC, lithium iron phosphate, etc., while the negative electrode materials generally include amorphous carbon materials, graphitized carbon materials, silicon-based materials, nitrides, and new alloys. &e...
Read More
-
Requirements for a good glove box
Feb 26 , 2021
The quality of the is determined by many factors, mainly leakage rate, water and oxygen index, regeneration frequency, equipment failure rate and function. 1)Leakage rate: Leakage is the most important factor affecting the performance of the glove box, because the size of the leakage rate determines the concentration of water and oxygen impurities in the glove box, the regeneration frequency...
Read More
-
5 channel automatic sorter machine
Mar 04 , 2021
Cylindrical battery sorting machine is a test and sorting device for the AC internal resistance, DC voltage and other parameters of cylindrical batteries. It comes with a high-precision internal resistance and voltage automatic test system. The equipment is based on the internal resistance and voltage set on the computer software. The voltage value accurately sends the battery to the designated ge...
Read More
-
Introduction of Lithium Battery spot welding machine
Mar 12 , 2021
Spot welding is a very important step in the battery production process. Whether it is a single cell or a battery pack, positive and negative poles, tabs, etc., a spot welder is required.Spot welding machine also has many different type，here are the introduction of them： 1. Pulse cell spot welding machine：most used in the battery lab research，it can used for welding (single pin welding) of th...
Read More
-
Coin cell crimper
Mar 15 , 2021
ACEY New Energy has standard sealing die can be used for the sealing of 20mm diameter series of button batteries such as CR2016, CR2025 and CR2032 A set of hydraulic coin cell crimper is very good versatility, as long as the diameter of 20mm unchanged, in a certain range of any thickness of button battery can be sealed, do not need to replace the mold, just turn the sealing die to the appropriate ...
Read More
-
BMS TESTER
Mar 19 , 2021
The main function of BMS is to improve the utilization rate of the battery, prevent the battery from over-charging and over-discharging, and extend the service life of the battery pcak. Monitoring the state of the battery is the core component of the battery pack, the quality of BMS will directly affect the safety and reliability of the battery and the application equipment. The system tests to en...
Read More
