-
Requirements for a good glove box
Feb 26 , 2021
The quality of the is determined by many factors, mainly leakage rate, water and oxygen index, regeneration frequency, equipment failure rate and function. 1)Leakage rate: Leakage is the most important factor affecting the performance of the glove box, because the size of the leakage rate determines the concentration of water and oxygen impurities in the glove box, the regeneration frequency...
Read More
-
5 channel automatic sorter machine
Mar 04 , 2021
Cylindrical battery sorting machine is a test and sorting device for the AC internal resistance, DC voltage and other parameters of cylindrical batteries. It comes with a high-precision internal resistance and voltage automatic test system. The equipment is based on the internal resistance and voltage set on the computer software. The voltage value accurately sends the battery to the designated ge...
Read More
-
Introduction of Lithium Battery spot welding machine
Mar 12 , 2021
Spot welding is a very important step in the battery production process. Whether it is a single cell or a battery pack, positive and negative poles, tabs, etc., a spot welder is required.Spot welding machine also has many different type，here are the introduction of them： 1. Pulse cell spot welding machine：most used in the battery lab research，it can used for welding (single pin welding) of th...
Read More
-
Coin cell crimper
Mar 15 , 2021
ACEY New Energy has standard sealing die can be used for the sealing of 20mm diameter series of button batteries such as CR2016, CR2025 and CR2032 A set of hydraulic coin cell crimper is very good versatility, as long as the diameter of 20mm unchanged, in a certain range of any thickness of button battery can be sealed, do not need to replace the mold, just turn the sealing die to the appropriate ...
Read More
-
Lithium battery R&D Equipment
Mar 31 , 2021
The lithium ion battery is composed of four parts: positive electrode, negative electrode, non-aqueous electrolyte and diaphragm. The corresponding lithium equipment in the first stage of lithium production mainly includes vacuum mixer, coater, roller press, etc. The middle process mainly includes die-cutting machine, winding machine, stacking machine, electrolyte injection machine, etc. In the ba...
Read More
-
What equipment is needed to make lithium battery pack
Apr 01 , 2021
3C lithium battery pack process, if you want to control the quality and save costs by yourself, it is recommended to buy a cylindrical battery automatic insulation barley paper machine to eliminate defective products, realize the function of pasting barley paper on qualified batteries, and complete the number of cylindrical finished batteries per hour About 4,000 sticks, manual stick...
Read More
-
Why do lithium battery cells need to be tested with battery cell capability grading machine
Apr 16 , 2021
You’ll see, hundreds of batteries are clamped into vertical and horizontal battery cell capacity grading machine in battery cell manufacturing factory or battery pack assemble plant. Row after row, each cabinet can put hundreds of cells, namely hundreds of test points. The lithium cell is converted here to get the capacity, and know the size of the capacity, is the capacity. Through the capacity g...
Read More
-
What’s the function of lithium battery formation?
May 08 , 2021
A lithium-ion Battery formation is activated by a single charge just after it is produced, similar to the way a floppy disk is "formatted". The battery can only start charging and discharging normally after the transformation is completed. The principle is simply that the first charge of the battery activates the active material inside the battery and creates a dense film on the surface of the ano...
Read More
