-
A brief description of the lithium battery automatic stacking machine
Oct 29 , 2021
A brief description of the lithium battery automatic stacking machine: 1. This equipment is mainly used for the Z-shaped lamination assembly of the cathode and anode of the lithium battery cell and the isolation membrane; 2. Adapt to product specifications: L×W×H: (40—200)×(40—150)×(30—55); 3. Capacity: 2.5 seconds for each single chip; 4. Life: lif...
Read More
-
The production process of Pouch cell lithium battery
Nov 03 , 2021
With the development of science and technology, the technical barriers to battery production have been broken through one by one, and the pouch cell lithium battery has gradually stepped onto the stage, and subsequently entered a large-scale trial stage. The main processes in the production of pouch cell lithium batteries are pole piece, installation and formation. 1. The pole piece process. The m...
Read More
-
The working principle of the oven
Nov 11 , 2021
When the industrial oven is working, the operator obtains the internal temperature value of the industrial oven through the instrument and the temperature sensor, and then operates through the control system. The hot air circulation heating method of the industrial oven is better than the ordinary heat radiation heating method. The fluidity of the gas can speed up the drying speed of the materials...
Read More
-
Four processing steps for battery spot welding machine failure
Dec 03 , 2021
When we are using a spot welding machine, due to unfamiliarity with the equipment and unsuitable operation etc, some problems usually occur. The following are common problems and solutions： One: The pedal welding machine does not work, and the power indicator does not light up: a. Check whether the power supply voltage is normal; check whether the control system is normal, whether the communicatio...
Read More
-
What are the preparations before starting the automatic spot welding machine?
Dec 10 , 2021
The electrode pressure of the battery pack automatic spot welding machine has a significant effect on the total resistance R between the two electrodes. As the electrode pressure increases, R decreases significantly, while the increase in welding current is not large, and it cannot affect the decrease in R. Heat production is reduced. Therefore, the strength of the solder joint ...
Read More
-
What are the factors that affect the efficiency of the battery spot welding machine?
Dec 24 , 2021
●Welding current Since the heat generated by the resistance is proportional to the square of the current passed, the welding current is the most important factor in generating heat. The importance of welding current does not simply refer to the size of the welding current, the current density is also very important. ※Nugget: refers to the metal part that solidifies after the melting of the ...
Read More
-
What are the characteristics of the vacuum standing box?
Feb 24 , 2022
The vacuum standing box is a device that can be applied to the production of pouch cell lithium-ion batteries and cylindrical lithium-ion batteries. Its function is to complete the vacuum standing of the battery after liquid injection to promote the absorption of the electrolyte by the pole pieces; or It is used for vacuum standing defoaming and vacuum storage of various materials. T...
Read More
-
What is the Difference Between DC Inverter Spot Welding Machine and Transistor Spot Welding Machine?
Mar 03 , 2022
In recent years, in the precision resistance welding filed, DC inverter spot welding machine is the most widely used welder. However the transistor spot welder also appears more popularly. Then what is the difference between these two types? 1. Difference of control principle of the welding power supply The power supply of inverter spot welding machine first rectifies and filters the industrial po...
Read More
